My water temp reader is not working properly when I'm driving it stays on the middle when I stop it goes to High I have changed the radiator knob and the engine coolant temperature sensor.

My water temp reader is not working properly when I'm driving it stays on the middle when I stop it goes to High I have changed the radiator knob and the engine coolant temperature sensor. 1 answer

I have a 1996 Chrysler Sebring. I replaced the timing belt (which was broke when I bought the car) and water pump. When I start the car it barely runs, sounds like its running on about 2 cylinders and the others are trying to kick in. It will only stay running if I hold the accelerator all the way open. Actually it will only start if the accelerator is all the way open. Any suggestions. 1 answer

The timing belt was broken when I bought the car. I replaced the belt and water pump which was also in need of replacement. Now when I go start the car the only way it will fire or even start to try t...

How do get the coolant temperature sensor calibrated?, can I do it myself or do I take it to the shop?. Where is that sensor located on the engine? 1 answer

Also need to know where my radiator fan fuse located? I have no Manuel

1999 chrysler sebring jxi the rear window is stuck inside the door panel when it rains water stays in the door and then floods the passenger front & back seat. How can I get the water out? 5 answers

1999 chrysler sebring jxi the rear window is stuck inside the door panel when it rains water stays in the door and then floods the passenger front & back seat. How can I get the water out?

I have a 2001 Chrysler Sebring, 2.7L. It recently overheated, n I had to add coolant, as it was empty. Yesterday, it overheated, but instead of the temperature gauge going up, it dropped all the way DOWN, past the C...the car has no heat, and overheats immediately when the car is warm. Does any one know what could b wrong??? 90 answers

2001 Chrysler Sebring, 2.7L, no heat, overheating, temp. gauge dropped all the way DOWN when car overheated, instead of going up, and now doesn't work at all- still stuck on C.....