My door locks do not work.
Asked by paulf250 Jan 12, 2007 at 01:51 PM about the 1999 Ford F-250 Super Duty XL 4WD Extended Cab SB
Question type: Maintenance & Repair
The lock and unlock buttom on the door or the keyless do not fully operate the locking mechanism. The lock moves a little bit, but not enough to fully open or lose the locks. Could it be the keyless module?
5 Answers
tropikalpirate answered 17 years ago
It could be your keyless module. Make sure that everything is connected correctly. If it is connected correctly and there are settings on it make sure that it is not set to a security mode. Sometimes there are setting choices that you can be unaware of so double check that. Good luck.
door lock actuator--not the keyless module since the button on the door doesnt work either
My truck has the same thing on the passenger side door... It is the actuator.
Could it possibly be tha switch itself ?? I just asking !
It's the actuators in the doors common issue. You can buy new one for 25 bucks for the set on Amazon. The trick is taking apart the door. The actuator is at the latch where the door frame and latch meet the door panel has to come off as well as most of the lock linkage rods and clips. There are some good YouTube videos of the process. I would say it's a 3 out of 5 on the difficulty level. The things to be careful of are the rod linkage clips and the door panel clips breaking any of them can turn in to a big problem. Good luck.
