driver door poer window motor.
I cannot remove the motor because the window is in the UP position due to a 12volt
problem at the console switchs. Th driver switch works but not for driver side and 12 volts
direct to door motor results in sparks only. I am apprehensive about removing the
regulator bolts for fear it will fall and jam. etc. Any suggestions? Thanks for considering
Drill holes in inner door to get to bolts holding motor to regulator,then remove motor.
Thanks for the info, I will try this,holes idea.. I was thinking about cutting a square patch but inner door is not flat. Your Idea sound better.
Search Ford Thunderbird Questions
Ford Thunderbird Experts