honda 2005 v6 automatic won't move in drive when cold
Asked by robcfisher Feb 09, 2021 at 11:24 AM about the 2006 Honda Accord EX with Leather
Question type: Maintenance & Repair
first thing in morning put in reverse, works fine. put in drive won't move delays about 30 seconds then moves forward. rest of day it works fine. (like after being parked for 8 hours) coming home doesn't have this issue
3 Answers
beatupchevy answered 4 years ago
They say use honda fluid only or it can cause harm , this may be the case ., the tranny may have been worked on before and a detail was missed , if the fluid is brown and burnt smelling then change it out . Pay attention to anything that drops out along with the pan if you decide to do the filter and fluid .
robcfisher answered 4 years ago
update- made an appointment to change the fluid, was going to change the inline transmission filter, but the dealer said there isnt one on the V6 3L. Test drove today to see what was happening (is my daughters car) Code reader threw a code today . PO746 Pressure control solenoid A performance or stuck off PO722 output shaft speed sensor Circuit no signal cancelled the fluid change, going to change the sensor tomorrow. symptoms today, slipping out of first gear, not moving.... hopefully this is the solution
robcfisher answered 4 years ago
update - changed Pressure control solenoid A testdrive slipping out of gear, when highway tested 3 4 gear, refusal to go into gear from stop. New error codes PO721 output shaft speed sensor Circuit range PO777 Pressure control solenoid B stuck on not sure I want to spend any more money on this beast???? what do you think the chance is of it working if I change solenoid B?
