I have a 2008 Toyota Tundra. I have several lights on in the dash including the ABS,VSC and others. My dealership ran the codes and stated that I would have to replace the wheel speed sensor on the R side. I have done this and my truck still has the lights on and will not engage in 4 hi or 4 lo. Any thought on this?
I had a similar problem. Check eng. Vsc and 4 Lo were flashing. For some reason headlights did not turn off automatically and drained the battery. Tried auto start and did not work. Hooked up jump pack and started by itself. Mechanics scanned and showed crank sensor, can sensor and more codes. Said it was related to auto start and security system. Cleared codes and seems fine so far. Not sure if related but if you have after market auto start , check there.
Thanks... I actually don't have auto start and my check engine light isn't on. Diagnostic scanner says its the R front ABS wheel speed sensor which I replaced. I'm at a loss without 4WD in a lot of snow.
Search Toyota Tundra Questions
Toyota Tundra Experts