my 01 blazer dosen't start no fuel i checked has power to the pump but the pump doesn't come on i pulled the pump out of tank and run power to it it came on and started pumping gas rite away but for some reason it's not pumping gas i even pulled off fuel filter and cranked the car over no fuel came out of the fuel line .

my 01 blazer dosen't start no fuel i checked has power to the pump but the pump doesn't come on i pulled the pump out of tank and run power to it it came on and started pumping gas rite away but for some reason it's not pumping gas i even pulled off fuel filter and cranked the car over no fuel came out of the fuel line . 6 Answers

Another issue when I got the Blazer back, no water comes out of the windshield squirter and it worked fine before. I fill the tank, fluid dumps when I start car. 1 Answer

My windshield wiper sprayer stopped spraying when I got it back from having a new motor installed. Makes noise like its going to work but doesn't. Added fluid to the tank, to the top, nothing, but wh...

My wife has a 2002 Chevy Blazer that is coding for a MAF sensor. What impact does this part have on the running of the car? Can it fail and cause the car not to run? Thanks and Happy Holidays to all. 2 Answers

MAF sensor code on 2002 Chevy Blazer. Car runs fine since I changed the fuel pump. Check engine light went out after the work was completed, but now has come back on. Do I need to change the MAF sen...

Ok i have a 1995 v6 4.3 chevy 4x4 blazer its getting fuel has spark and good compression it will turn over all day with out a problem but will not start 3 Answers

I've got a1995 4x4 Chevy blazer it's a v6 4.3 vortex with throttle body it will turn over all-day long without a problem but it will not start it's getting fuel fire and air it's got new spark plug...

1999 Chevrolet Blazer 4.3L V6 Replaced CPI, fuel pump, fuel filter and fuel hoses but now the vehicle will not start. No gas to cpi unit. Do I need to bleed the system? 1 Answer

Replaced CPI, fuel filter, fuel pump, and fuel hoses. Unit will not start. Doesn't appearing to be getting fuel to cpi unit. Do I need to bleed the fuel system?