1999 Chevrolet Blazer 4.3L V6 Replaced CPI, fuel pump, fuel filter and fuel hoses but now the vehicle will not start. No gas to cpi unit. Do I need to bleed the system?
1 Answer
Jose answered 3 years ago
Hi my name José, I got a 1999 chevy s10 4.3l the truck had same gaskets problem but I replaced all the gaskets on the engine and i put a new spark plugs, wires the spark plugs, new exhaust headers and I put everything back together and I tried to crank it up and it cranks but it doesn't start the engine what you think I should do?
Your Answer
Related Questions
-
1999 Chevrolet Blazer 4.3L V6 Replaced CPI, fuel pump, fuel filter and fuel hoses but now the vehicle will not start. No gas to cpi unit. Do I need to bleed the system? 1 answer
Replaced CPI, fuel filter, fuel pump, and fuel hoses. Unit will not start. Doesn't appearing to be getting fuel to cpi unit. Do I need to bleed the fuel system?
1999 Chevrolet Blazer
-
Maintenance & Repair
-
blazer will turn over and tries to start but does not start. it ran fine one day next it would not start unless you pushed the gas to floor, fuel pump is working, filter changed 1 answer
Now it will not even run but tries to start.
1999 Chevrolet Blazer 4 Door LS 4WD
-
Maintenance & Repair
-
My 1997 Chevy Blazer still won't start after I replaced the fuel pump 14 answers
I have a 1997 Chevy Blazer. The other day the car would crack but won't turn over also the fuel gauge stop working and I had no fuel pressure. I replaced the fuel pump and the fuel filter. The car ...
1997 Chevrolet Blazer 4 Door 4WD
-
Maintenance & Repair
-
I have a 1999 Chevy Blazer, 4x4, 4.3 vortec. We have changed the coil pack, fuel filter, distributor cap and button, the crank shaft sensor, cam sensor and plug wires as well as the ignition control module. We coming to a stop sign it will stall and sometimes when just sitting still. Sometimes it will start right back up and other times it takes several tries. I also have the oxygen sensor on order and it should be here tomorrow. Fuel pressure tested perfectly. No black smoke, no smell of rotten eggs or the cat glowing red. The only code that comes up is PO420. 2 answers
I have a 1999 Chevy Blazer, 4x4, 4.3 vortec. We have changed the coil pack, fuel filter, distributor cap and button, the crank shaft sensor, cam sensor and plug wires as well as the ignition control m...
1999 Chevrolet Blazer 4 Door 4WD
-
Maintenance & Repair
-
My blazer was running fine, went in the store and when I came out it would turn over but wouldnt start. I checked the relay and that is fine. Could it be the fuel filter rather than the fuel pump.HELP! 1 answer
Car was fine, came out of store would turn over but not start. Could it be the fuel filter other than the fuel pump?
2004 Chevrolet Blazer 4 Door LS 4WD
-
Maintenance & Repair
Shortcuts
Search Chevrolet Blazer Questions
Chevrolet Blazer Experts
-
#1Andrew OlsenReputation2,030
-
#2yetilikesbeerReputation1,350
-
#3RowefastReputation1,030
Related Models For Sale
Used Cars For Sale
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use.