4.7 L engine Cam sensor first bank

If the timing belt was just done or is overdue, you may have belt issues. The cam sensor is under the timing cover by the cam. Remove upper plastic timing cover and you will see it. If you wanna test it, minimum resistance is 835 ohms and maximum is 1400 ohms and you measure it with engine cold.

what is the procedures to test the camshaft position sensor. have replaced sensor and pu is still having problems. is there something else i need to check

camshaft position sensor issue is on a 2001 toyota Tundra 4.7

just found out today check engine light wouldnt go out with computers for inspection on a 2007 toyota tundra that had cam shaft sensor and crankshaft sensor replaced also couldn't get check engine light off found out today their is 2 camshaft sensors on my 2007 toyota tundra. my suggestion is find out how many sensors you have and replace mine went all at once.