1993 toyota camry se 3.0l 5-speed will not start, can make fuel pump power by putting a little pressure on the the flapper in the MAF, but still no start
have spark, lots of cranking power but have no fuel pressure unless a put pressure of the
flapper in the MAF.....?when fuel pressure is manually inputted, still no start...not sure
how to test MAF, IAC, TPS, did I lose an ECM?
You need a NOID Lite. This is a special little test light you connect to one of the fuel injector connectors. The light should blink when you crank the engine. Try a parts store...they should have the correct light for your car. If the light blinks on crank...the ECM is pulsing the injector on and off. Good Luck
Search Toyota Camry Questions
Are you a UK consumer? CarGurus now has a discussion forum in the UK.
Toyota Camry Experts