I have an 08 ford fiesta zetec and the trip reset button on the end of my indicator stalk is not scrolling through the functions; mpg, miles until empty, etc. Just wondering is this is due to a loose wire/faulty switch, or could it be something else? Thanks
expect it to be the switch ...
Okay. Do you think that will be easy/inexpensive to fix?
for the easy part, remove the dash trim panel, held probably by clips and/or a few screws. so have a simle multi bit kit ready, a philips head screw driver, a flathead, a small socket set... since im not exactly sure of that model, you should have to remove a couple of small hex head, about size 10mm, or star screws. to get to the main wire harness to the button. a small flathead screwdriver might help. the button or series of bottons should be held by a coulpe of screw or clips. if you can use a dvd remote, dont worry yourself crazy. a lot of plastic though, so be carefull, especially if its cold
its a lot of gd finick plastic whatnot, small screws and lots of scrapes and cuts because of the room to work with
Looking for a Used Fiesta in your area?
CarGurus has 17,096 nationwide Fiesta listings starting at $1,997.
Search Ford Fiesta Questions
Are you a UK consumer? CarGurus now has a discussion forum in the UK.
Ford Fiesta Experts