GMC Sierra C/K 3500 Questions Any type
- Recently Active
Is it possible to convert the more boxer front end, (meaning the bumper, hood, grille, lights, and fenders) on 1998 year GMC Sierra c3500 to any newer year (2005 area) GM truck?
I have a 1990. Top-kick with a 454 and Allison tranny- When I turn the key to the on position the starter starts to crank and continues even after it starts. This is not hitting the start position.....
clutch will engage when jumped, 2 prong plug that connects to compressor has no power. Any ideas? Thanks
Greetings and help !; I have a 1990 GMC K3500HD 4WD lifted with a 454 engine. Front brakes tend to jam and heat up when it goes into operational temperature. Already replaced calipers, pads, discs and...
VEHICLE JUST SPEEDS UP, AS I START TO SLOW DOWN OR COME TO A STOP, OR IF I START IT UP AND LET IT IDLE, IT WILL ACCELERATE UNTIL I POUNCE ON IT!! BUT IT ONLY DOES ONCE DURING THE DAY, FOR NOW. WON`T D...
What is the GVWR on the listed truck. it has a 7.4 liter engine, standard cab
1988 gmc 3500 v8 and 125,000 miles
I have a 1999 gmc 1 ton dually. It's 2 wheel drive. All of the sudden on a road trip the trans started to slip. Now it will go about 50 miles on a cold start then start slipping. I have changed th...
will 1/2 ton front end parts will work for a 3/4 ton front end? like the a-arms and idler arm and pitment arm? for a 1990 gmc/chevy 4x4
The truck upshifts and down shifts inapropriately and now will not go more than 35 miles an hour. We think that it may be a sensor. Please advize
has got a new egr valve, new map sensor, new iac motor, new tp sensor. plenty of gas. it seems like the ignition just shuts of it does start rite back up
Search GMC Sierra C/K 3500 Questions
GMC Sierra C/K 3500 Experts