94 cevy 1 ton stalls at idle

Asked by Feb 05, 2014 at 04:27 PM about the 1994 GMC Sierra C/K 3500

Question type: Maintenance & Repair

has got a new egr valve, new map sensor, new iac motor, new tp sensor. plenty of gas. it seems like the ignition just shuts of it does start rite back up

2 Answers

10,245

This is a TBI 454 (or 350) correct? Does it die with a trottle input? Check to see if the fuel injectors are spraying after it dies and when you try to re-start it. If the ignition module has not been changed recently thats where I would start. Its bolted to the top of the baseplate in the distributor. The pick-up coil could be tested also. Most of the time the ICM fails completely but it's worth looking at and easy to change (make sure you use di-electric grease or the supplied grease between the module and the baseplate or it cooks quickley). The p/u coil is a little deeper, you must pull the dist to change and re-time the engine.

19,705

Look for a vacuum leak

Your Answer

Add photo

Related Questions

  • 94 cevy 1 ton stalls at idle 2 answers

    has got a new egr valve, new map sensor, new iac motor, new tp sensor. plenty of gas. it seems like the ignition just shuts of it does start rite back up

    1994 GMC Sierra C/K 3500

    -

    Maintenance & Repair

  • 1999 gmc 1 ton 2 answers

    I have a 1999 gmc 1 ton dually. It's 2 wheel drive. All of the sudden on a road trip the trans started to slip. Now it will go about 50 miles on a cold start then start slipping. I have changed th...

    GMC Sierra C/K 3500

    -

    Maintenance & Repair

  • VEHICLE JUST ACCELERATES 1 answer

    VEHICLE JUST SPEEDS UP, AS I START TO SLOW DOWN OR COME TO A STOP, OR IF I START IT UP AND LET IT IDLE, IT WILL ACCELERATE UNTIL I POUNCE ON IT!! BUT IT ONLY DOES ONCE DURING THE DAY, FOR NOW. WON`T D...

    1995 GMC Sierra C/K 3500

    -

    Maintenance & Repair

  • will 1/2 ton front end parts will work for a 3/4 ton front end? 5 answers

    will 1/2 ton front end parts will work for a 3/4 ton front end? like the a-arms and idler arm and pitment arm? for a 1990 gmc/chevy 4x4

    1990 GMC Sierra C/K 3500

    -

    Car Customization

  • Why my front brakes keep getting jammed ??? 1 answer

    Greetings and help !; I have a 1990 GMC K3500HD 4WD lifted with a 454 engine. Front brakes tend to jam and heat up when it goes into operational temperature. Already replaced calipers, pads, discs and...

    1990 GMC Sierra C/K 3500

    -

    Maintenance & Repair

Search GMC Sierra C/K 3500 Questions

GMC Sierra C/K 3500 Experts

#1 Jake Thompson
Jake Thompson
Reputation 20
#1 rpedgar
rpedgar
Reputation 20
View All

Related Models For Sale

Used GMC Sierra 3500
7 Great Deals out of 253 listings starting at $4,686
Used Chevrolet C/K 3500
239 listings starting at $4,797
Used Dodge Ram 3500
64 Great Deals out of 2,245 listings starting at $3,999
Used GMC Sierra 2500
155 listings starting at $3,695
Used GMC Sierra 1500
768 Great Deals out of 69,776 listings starting at $1,800

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use.