Ford Mustang Questions Any type
Rough Idle, Engine Dies
When i start my car it idles rough and then dies. i just rebuilt the carb, but that didn't help. thereis enough fuel flowing. i can't figure out what else could be wrong. its a 1966 with a 289 2v.
Crank But No Start Ford Mustang
Have a 92 lx 5.0l mustang that will not start. There is spark, the fuel pump has just been replaced. Thought that was the problem. Have heard it may be an ecm issue. The battery is fine. The engin...
High Beam Problem
Ok. I have a 99 Ford Mustang with Xenon 8000k bulbs. One night I drove a friend home. I had my high beams on. When we stopped at her house, I forgot to turn them off when I shut the car off. When I t...
Getting Started
I know a lot of know a hell of a lot about cars, but i don't. I wanna learn though, so i was just wondering how you guys got started and learned everything you know...
How Much Would A 1965 Ford Mustang Cost?
i just want to know how much a mint condition one would cost
Why Do Injectors Support More Crank Hp On A N/a Engine Over A Forced Induct...
i have a cobra with a vortech blower on it. i just swapped from 42lb injectors to 60lb because im upgrading my blower and i was considering switching to a turbo to avoid parasitic loss thats associate...
Morgan Mustang?
Info on a 2007 GT Morgan performance group gt 500s? Local dealer has one and I could not find any information on it. Is it a real 500s or just a clone?
A Wire From Inside My Rpm Guage Disconnected And Smoked The Wires All The W...
i need to know how and wht to replace i dont have a better pic then this at the moment but is there any way to start it to get it to the shop for repairs?
Where Can I Find The Body And Chassi Of A 1967 Shelby GT 500?
i want to build a 1967 Shelby GT500 from ground up and would like to know where i can find the body and chassi
Motor Swap
what is it gonna take to take my 2.3 stang and put in a 351w fuel injected
Dropped A Nut Into The Intake
About 2 weeks ago i droped a nut into the intake. Ive tried using a magnet and accum and tnothing has worked. what would be the correct procedure for removing the intake on my 289 2v mustang?
Power Vs. Warranty
is there anything that can be done to add power to an 09 mustang v6 that doesnt void the warranty?
Will It Fit?
Can a 5.4L 605hp cobra motor be shoe-horned in place of a V6 on a 07 mustang without cutting into the fire wall or notching the shock towers to fit the headers?
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.