Chrysler Questions Any type
- Newest
- Recently Active
- Unanswered
Car Wont Start
I hit a huge pool of water and my car died wouldn't start towed it home pull the plugs turned over some water came out but now it won't crank at all just makes clicking sound
Lost
Okay so I have a 2002 Town & Country that is giving me issues is throwing the code p1391 and I have changed the camshaft sensor and the crankshaft sensor and it will start and idle soon as I put i...
Unsubscribe
I've purchased a vehicle and don't need the ads/notification any longer. What to do?
Crk Sensor Air Gap
I'm also working on a Chrysler Sebring with a no spark condition. It's squawking a code 11-NO CRANK REFERENCE... I've replaced the distributor which houses the CAM sensor which in turn sends a si...
Acceleration
Everytime I drive the 1988 Crysler Fifth Avenue the acceleration has dead spots but then works again but it acts like its going to kill the engine when the acceleration starts acting up? Any ideas....
2006 Town And Country
Replaced radiator water pump thermostat faN relay fans is comming on but temp still runs up and down mostly up in red
2002 Pt Cruiser
Okay so the dash lights head lights and power locks won't work. I have replaced the fuses, bulbs multifunction switch and checked the fuse relay. I believe it's the connector to the main power cord...
1999 Sebring 2dr Jxi Convertible
my alarm goes off for no reason and it kills my battery I keep doors unlocked and every morning I have to jump my car, and I replaced battery.
Fuel Pump
I changed fuel pump and filter now I can't get it started. It's trying to start I hear the pump working relay is good when I try giving it gas it dies pulled out pump twice already getting good ...
My Speedometer In My 2006 Pt Cruiser, Erratically Jumps Back And Forth From...
I replaced the input/output sensor, because I showed the mechanic the video of what was happening, and that's what they told me was wrong. A week later, my speedometer is jumping back and forth, light...
Front Hub To Knuckle Torque Specs. 2008 Chrysler Aspen
Need torque specs for mounting bolts, hub to knuckle
Fueling Without Gas Nozzle Going In All The Way - Car Won't Start Now.
Long story short, I was hit by a semi precisely where my fuel door is. I have a 2004 chrysler sebring. It ran just fine after collision, just cosmetic damage. However, upon fueling for the first t...
Plymouth Grand Voyager
Is 96 caravans heatercore compadable with 99 grand voyager
Mph And Rpm Lights Aren't Working
What can I do to fix my rpm and mph lights working again the iod fuse looks good isn't blowed and have no idea why they aren't working please help
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use.