Chevrolet Express Questions Any type
Battery Will Not Charge. Where Do I Start?
While driving the battery started to drain slowly. I drove for about a 100 miles before it stop. And it will start, but will not charge. NEED HELP!!!!!
1999 Chevy Express Gladiator 1500 Series Van
I have a 1999 Chevy Express Gaval Gladiator 1500 series van. I am wonder if I could interchange the interior parts and put it in a 2008-2010 Chevy Express Van Passenger or Cargo. Thanks for your help,
2011 Brake And Turn Fuse
Were is the fuse for brake and turn on 2011 van? right side. I removed seat and checked all fuses, all look good. checked all fuses with meter shows good. The cover for the fuse box under the hood say...
2000 CHEVY EXPRESS VAN CAMSHAFT POSITION SENSOR
Can someone tell me where the camshaft position sensor is located exactly on a 2000 chevy express van 1500, v8 350?
Lift Kit
is there a suspension or body lift kit for a 2007 chevy express 2500 2wd
Windows
Do the side and rear windows open? If so, in which direction and how far?
Starts Then Quits
starts every time...quits in seconds...doesnt seam to be a security system...have good fuel preasure...changed maf sensor and fuel relay
Where Do I Remove A 2000 Chevrolet Express 1500 Throttle Position Sensor
2000 Chevrolet Express 1500 Throttle Position Sensor? i want to install a new one and cannot find location of the part
How Do I Find Out The Size(in Amps) My Alternator Is?
i need to replace my alternator and i need to know what size to tell the repair shop to order.. help?
Engine Cover Removal
How do I remove the engine cover on this Van? There are no inside clamps that most vans have.
Caliper Bot Size
what size is the caliper bolt to remove brake pads
Brake Light Problems
I have a 2001 chevy express van. When you turn on the headlights the brake lights won't work. Does anyone know what would cause this
How Do You Fix Circulation Dampers On A 2005 Chevy Express?
My circ fan works but only blows out the defrost registers.
Rattle
When I accelerate especially, I hear a noisy rattle from what appears to be near the side doors. The moulding on the one door seems very loose, and I think should be glued or adhere to the metal tight...
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.