check engine light on, dash lights going on and off and ccd code on 2000 chrysler sebring convertible
My Check engine light came on and now my dash lights go on and off and I get a CCD code. If I pound on the dash it works for a while. autozone tested and gave me the code P1698 which shows as failed ECM, probable cause open CCD bus line or failed TCM. Is this something I can find and fix?
I'm not sure if you can fix, but probably the Transmission Control Module that is bad, It may be just a bad connection running to it. P1698 CHRYSLER - ECM Fault No CCD Message From TCM... Possible causes... - Faulty Engine control Module (ECM) - Engine control Module(ECM) harness is open or shorted - Engine control Module (ECM) cicuit poor electricl connection - Low battery voltage... Possible symptoms... - Engine Light ON (or Service Engine Soon Warning Light) P1698 Chrysler Description... Engine control Module (ECM) unable to communicate with Transmission Control Module (TCM)
I had a Dodge van with the same code, I found rodent damage to the main harness, repaired damage no more code. HTH
Search Chrysler Sebring Questions
Chrysler Sebring Experts