Was running then quit and hasnt started since. Cranks but no start.
The car was running and driving fine with no noticeable problems. It made a chirp noise as I was pulling into my driveway and started running a little rough. I put it in park and the car died completely. Since then it will turn over but does not start. Has about 180 for compression on the cylinders and about 135-140 for fuel pressure. its a 2002 Sebring with the 2.7 and seems to fire less often on cylinders 2 and 4. tried changing out the coil packs with one of the others that is firing fine and does the same thing on the same cylinders. Hadent done much with it for a while because I was overly frustrated with it but tried again to start it tonight and it fired but did not start and seemed to exhaust through the air intake. Could this be a timing issue even thought I seem to be getting good compression?
Search Chrysler Sebring Questions
Chrysler Sebring Experts