I have a 2011 Chevy Aveo and had to replace all 3 major clutch components, I still can't get it into gear. someone help please.
Clutch went out, I replaced the clutch master cylinder, the slave drive, and dropped the
trans and replaced plate and through out bearings. I bled the system and I still can't get it
into gear. Any suggestions?
Did you ever play with the clutch adjustment under the dash when you had the old system in? Try bleeding the system one more time. You may have to adjust the clutch. If you did adjust it, you may have made the stroke too long or too short. Get some help and watch the slave cylinder to see if it's working properly. I have heard of them being defective. Post back with results. I'm hoping it's external and not something like the wedge that holds the throw out bearing falling out of place.
I finally found out what the cause was and it was the pin in the master clutch behind the clutch pedal. Just needed to be adjusted.
Search Chevrolet Aveo Questions
Chevrolet Aveo Experts
Related Models For Sale