Asked by GuruDDDSWL Sep 16, 2023 at 12:38 PM about the 2009 Chrysler Town & Country Touring FWD
Question type: Maintenance & Repair
Engine turns over but will not start
beatupchevy answered 7 months ago
check for proper spark , fuel pressure and injector pulse , Do you hear the fuel pump prime the system when you hit the key ? ( wwhhhrrrr )
A mechanic who can see the car could easily diagnose this. The problem could have any of a hundred causes.
Engine turns over but will not start
2009 Chrysler Town & Country Touring FWD
-
Maintenance & Repair
I drove the van to the bank and when i came out it would not start. The lights all come on but the engin will not turn over. I have had the Battery, Starter checked and they are ok. I replaced the ign...
2000 Chrysler Town & Country
-
Maintenance & Repair
My car will not start because we think the anti-theft has been turned on due to a key being used in ignition that was not chipped and the car only makes this clicking sound.
2004 Chrysler Town & Country Touring LWB FWD
-
Maintenance & Repair
When the pcm was replaced along with other parts, the car worked okay for about 10,000 miles, then the exact same problem started again. This time they said no power going to the trans and I need th...
2009 Chrysler Town & Country Limited FWD
-
Maintenance & Repair
Rear heat not working in 2009 limited Town and Country. We originally took it to the dealership because our heat wasn't working and we noticed a liquid all over engine. Van even overheated on the ...
2009 Chrysler Town & Country Limited FWD
-
Maintenance & Repair
2009 Chrysler Town & Country
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.