2008 Chrysler 300C Remote Start Not Working After New Battery. Everything else on the key functions fine.
Asked by Joshua Jul 24, 2015 at 07:39 PM about the 2008 Chrysler 300 C RWD
Question type: Maintenance & Repair
My 2008 Chrysler 300C Remote Start is Not Working After New Battery was installed.
Everything else on the key functions fine. If anybody could help that would be much
appreciated.
3 Answers
Prob'ly needs to be reset somehow, but who knows? Really- is the world gonna stop turnin' if you can't start your car without sittin' in it?!
Masterblaster426 answered 4 years ago
Jamblues: it's quite apparent YOU are too poor to be able to afford the fine Chrysler 300C hemi with remote start feature. Go find a job and maybe.... just MAYBE someday you too, can have remote start. Once you do have it, you too might understand the reason Chrysler Corp added this feature to the options list. Masterblaster426
The engine can be started two consecutive times (two 15-minute cycles) with the RKE transmitter. However, the ignition switch must be cycled to the ON position WITH THE KEY before you can repeat the start sequence for a third cycle. So, you can ONLY remote start the car two-times, thereafter you will have to get into the car and start the car with the key BEFORE the remote start will reset and become available.
