hello i have a 1994 3.0 vze engine. i am having a problem with it stalling
my 4runner stalls when comming to a stop, and runs rough at idle. the m.a.f. sensor has been replaced, and the 02 sensor before the converter.ther was a code for ignition. cant remember what the # was. does the 94 3.0 vze engine have an ignition control module? and would it cause this problem? any feedback is greatly appreciated.
Not likely the module.Check fuel pump pressure.
Have you checked the rubber throttle body air intake tube? My 94 v6 4runner had this same issue, and the rubber primary intake tuber had dry rotted and was leaking in fresh, unmetered air. Mine behaved exactly like you are describing. I got a replacement (Dorman) from amazon for about $32. Make sure you have a good tight connection here, if the tube looks like its in good shape. Good Luck!
Search Toyota 4Runner Questions
Toyota 4Runner Experts