Wire hardness replacement

Asked by Rosie_gg Jun 18, 2020 at 11:49 PM about the 1995 GMC Sierra 1500 C1500 SL Extended Cab Stepside SB

Question type: Maintenance & Repair

So my hubby replaced his 1995 5.7block to a
1992 1500 5.7 block and he is wondering if you
have to replace the wire hardness also?

1 Answer
9,505

brotherben answered 3 years ago

Don't know what all the differences are between the 2 vehicles but on doing an engine swap, it's pretty standard that everything to the engine follows it like the wiring harness and ECM. The reason being is that your 95 sensors in your engine might send codes that your 92 ECM might not compute.

Mark helpful

Your Answer:

Related Questions

  • Wire hardness replacement 1 Answer

    So my hubby replaced his 1995 5.7block to a 1992 1500 5.7 block and he is wondering if you have to replace the wire hardness also?

    1995 GMC Sierra 1500 C1500 SL Extended Cab Stepside SB

    -

    Maintenance & Repair

  • Need to find 1995 GMC Sierra 1500 5.7L V8 O2 sensor wire 13 Answers

    I am doing work on my 1995 GMC Sierra 5.7L V8 I recently purchased. It is idling very rough and stalls when put into gear. When looking through the engine bay, I discovered that the O2 sensor wire wa...

    1995 GMC Sierra 1500 K1500 SL 4WD Standard Cab LB

    -

    Maintenance & Repair

  • Engine replacement cost 2 Answers

    Recently took truck to dealership due to engine noise. They found shavings over several bearings and are recommending engine replacement. Does that seem reasonable. What should I expect to spend fo...

    2016 GMC Sierra 1500 SLT Double Cab

    -

    Maintenance & Repair

  • Problem with ground wire from fuel pump connection to truck frame 20 Answers

    I changed the fuel pump on my 1996 GMC Sierra earlier in the year. I cut through my truck bed right above the fuel pump so I would have easier access to it. For the most part my truck has been fine b...

    1996 GMC Sierra 1500

    -

    Maintenance & Repair

  • What is causing my GMC to advance the timing about 25° when I plug the wire under the dash together? 1 Answer

    I disconnected the tan/black wire before setting the timing. I set the timing to 0°. Shut it down, connect the wire back, and when I check the timing, it advances about 20°. If I disconnect the wire...

    1995 GMC Sierra 1500 C1500 SL Extended Cab SB

    -

    Maintenance & Repair

Own this car?

Share your experience with others.

1995 GMC Sierra 1500

Write a car review

Review another car

Shortcuts

Search GMC Sierra 1500 Questions

CarGurus Experts

  • #1
    yetilikesbeer
    Reputation
    12,350
  • #2
    dragonflyoffshore
    Reputation
    11,510
  • #3
    John Saffrahn
    Reputation
    11,450
View All

Know more, shop wisely

Search

Related Models For Sale

Used Ford F-150
6,091 Great Deals out of 133,226 listings starting at $1,100
Used Toyota Tacoma
2,006 Great Deals out of 32,954 listings starting at $2,990
Used GMC Yukon
661 Great Deals out of 11,549 listings starting at $1,499
Used Dodge RAM 1500
78 Great Deals out of 1,592 listings starting at $995
Used Chevrolet Tahoe
1,065 Great Deals out of 21,006 listings starting at $1,000

Used Cars for Sale

2024 GMC Sierra 1500 For Sale
93 Great Deals out of 43,929 listings starting at $28,505
2023 GMC Sierra 1500 For Sale
275 Great Deals out of 4,646 listings starting at $31,987
2022 GMC Sierra 1500 For Sale
192 Great Deals out of 1,695 listings starting at $28,410
2021 GMC Sierra 1500 For Sale
316 Great Deals out of 4,026 listings starting at $19,000
2020 GMC Sierra 1500 For Sale
175 Great Deals out of 2,399 listings starting at $17,990

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.