how do you reset the airbag light on a 1998 chevy blazer
It has to be diagnosed and fixed. A fault has been detected, worry less about just re-setting the light that what is wrong with your air bag system. The vast majority of the time it means they will not deploy in an accident, but there is always that small chance they will inadvertently deploy. A mechanic or dealer can disable them but the light will remain on
Each time the engine is started the airbag computer runs a self diagnosis. When a problem within the system is detected the airbag light stays on. Once you shut off the ignition the computer is cleared until you start the engine again and the self diagnosis cycle repeats. When the problem is fixed and the self diagnosis shows no more problems the system will reset itself and the light will stay off. HTH. -Jim
take off the positive side off the battery walk away for a few minutes and return put back cable see if it don't go out
Looking for a Used Blazer in your area?
CarGurus has 1,341 nationwide Blazer listings starting at $2,000.
Search Chevrolet Blazer Questions
Are you a UK consumer? CarGurus now has a discussion forum in the UK.
Chevrolet Blazer Experts