- Home
- / Questions
- / Pontiac
- / Bonneville
- / vacuum hose fuel economy indicator
vacuum hose fuel economy indicator
Asked by jimbotat2 Feb 09, 2011 at 09:50 AM about the 1979 Pontiac Bonneville
Question type: Maintenance & Repair
hello i hav a pontiac bonneville safari from 1979 and last week they have chains all the gaskest from the engine for me and take out the airco unit
now is my fuel economy indicator not working and i look under the dash and i see its working on vacuum but the hose is cut under the hood
can some one tell me where the hose must be connect?
i have a chilton repair book buy it on ebay but there is no info for this hose
its workking before the repair but someone cut this hose and now i dont now where to conect
sorry if my english is not so good i am from the netherlands
1 Answer
Your Answer:
Related Questions
-
vacuum hose fuel economy indicator 1 Answer
hello i hav a pontiac bonneville safari from 1979 and last week they have chains all the gaskest from the engine for me and take out the airco unit now is my fuel economy indicator not working and i ...
1979 Pontiac Bonneville
-
Maintenance & Repair
-
Vacuum seal on hose to the engine came loose, fixed it, still having issues? 1 Answer
I started my car to warm up, about 15 minutes later went to leave work and it was off. Checked the vacuum seal or hose came off, I reattached it and tightened the band around it. But now my car still ...
2000 Pontiac Bonneville
-
Maintenance & Repair
-
Brake pedal goes floor. Changed brake booster, no change. No visible leaks. Also, bled the brakes. Pulled vacuum hose off brake booster and covered with tape and I get resistance. All new pads on back and front. Confused 3 Answers
Brakes not working good so I changed both front and rear brakes. It looked like the rear brakes were doing more. Even after doing this pedal going to floor. Changed brake booster and bled brakes....
2002 Pontiac Bonneville SLE
-
Maintenance & Repair
-
Starts and idles fine. Won't accelerate. I can play with throttle to get it moving. Acts like a fuel delivery issue but have 47 psi even when I hit the gas. 1 Answer
When I remove vacuum hose from regulator I get 60 psi fuel pressure. I have P0102, P0131, P0171. I had a bad MAF but replaced it and I ran perfect for 400 miles last week. I will replace fuel filter...
2003 Pontiac Bonneville SLE
-
Maintenance & Repair
-
fuel pump issue 3 Answers
I have a 2000 Pontiac Bonneville that isn't getting power to the fuel pump, but with it disconnected from module have power. Have tried putting a lamp to the leads but it doesn't show power either. Ap...
2000 Pontiac Bonneville
-
Maintenance & Repair
Shortcuts
Search Pontiac Bonneville Questions
Pontiac Bonneville Experts
-
#1ticklemedalyReputation400
-
#2Js08016Reputation380
-
#2dandyounReputation380
Related Models For Sale
Used Cars For Sale
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use.