How do I disable or adjust the sensitivity on my 2000 Z3?
How do I disable or adjust the sensitivity on my 2000 Z3? It's driving me crazy because it goes off non-stop
I ment the alarm system...oops
Hi, I haven't had a z3 for quite some years now but I vaguely remember the alarm module is located in and above the glove compartment. You need to remove the glove box (which should be rather straight forward) to access this module. There are adjustment screws on/in this module which allow you to fine tune the sensitivity of the various sensors. It should be a very simple DIY, try google "z3 alarm sensitivity adjustment" and you should be able to find detailed instructions. Good luck.
Thanks a lot Vince!!! Big help
If you are referring to the alarm system, you need to know if it is factory installed or aftermarket. If it is factory, go to a BMW dealership an they can adjust it or remove it via the body control module in the vehicle. If it is aftermarket you will need to locate the main box for the system(usually on drivers side under steering column in foot box area). Once located check the outside of it for a small dial. That dial should be the sensitivity. Some aftermarket devices are set through the key-fob. So first thing to do is figure out if its stock or not.
Looking for a Used Z3 in your area?
CarGurus has 250 nationwide Z3 listings starting at $3,500.
Search BMW Z3 Questions
BMW Z3 Experts
Related Models For Sale