does the front hub have to be pressed to put on or no

does the front hub have to be pressed to put on or no 1 Answer

does cap on overflow tank for radiator need to be tightened all the way 3 Answers

Car is blowing cold air inside and temp. gauge is moving up and down alot could it be air bubble or is cap to tight on overflow tank

Why do I have to add coolant every few days...when I stop at light or drive thru it goes over 200 a little ways I put new water pump on but the fans never kick on I don't think...what could it be 3 Answers

There no leaks and never red line s on temp please help

I have 2004 Pontiac Grand am 3.4L 6 cylinder and the front wheel bearings need replacement. Does my car have press in bearings or NO. Also do the back need to be pressed in or NO. PLEASE ANSWER ASAP. 2 Answers

Why does my Grand Am sitting at a light starts to vibrate when I have the brake press down 3 Answers

I have a brand new tune up new wires new plugs 1 motor mount was replaced and still when I sit at a stoplight with the brake pressed down the engine starts vibrating or the whole car starts vibrati...