Ford F-100 Questions Any type
- Recently Active
what headers will go in the 1960 f-100 with a 302 crate engine and a T-5 tranny
Need to order rebuild kit but do not know make or model for my 1974 F100 Custom
I just installed a new master cylinder. Now I can't get the plunger to go in far enough to get the clevis to go on the pin on the pedal. Do I need to crack open a bleeder valve so that the plunger ...
My headlights doesn't come on all of a sudden what could be possibly wrong
I have a 1987 f150 4.9l that starts up runs good then sputters out and dies what can cause that besides fuel pressure (witch is good) the egr and IAC all good
I have a 1960 Ford f100 in-line 6...4 speed carb has been fixed ran good for about a week now it is hard to start and when it does start it wants to die when you push Choke back in it will run wit...
Converted F1 years ago 12v. While driving engine stopped. Electrical due to all gauges don't work. Turn on key gauges not working. Press starter button, starter spins. Headlights and horn works. Could...
Converted to 12 v years ago. Turn on switch no gauges work. Starter spins when pushing button. Lights, and horn work. Was driving and engine quit. Could it be bad ignition switch?
What trans to swap from 4 sod to auto
Behind my carb on the passenger side there is an idling spring that is screwed all the way in and every time I try to get my truck to idle it dies (yes I’ve readjusted...any help?
Yes i have a Ford f100 truck, rear end ratio is 3.25 original rear end. Would anyone know how many teeth would be on the gear.or do i pull the punkin out? Sec. i would like to go a 3.00 gear ratio...
Daily driver. Running good. Start easy. Fine fine. Took on fuel. Next day starts hard. Ok bad gas. Drained tank. Gave it premium. Ran it down highway fine. Backing into drive it kills. Get it in & ...
Change the spark plugs, the ignition module, the coil, and the battery. The truck will turn over but won't start.
I used a screwdriver on my broken ignition cylinder switch and it sparked now truck lights dont work and truck wont start I am mostly worried about the head lights and back lights etc
My '82 F-100 will "kill" the new battery after only a couple days, unless I unhook one of the cables. Any clues? Thanks.
I have a 1968 ford truck f100 on the dash there r 5 lights to light up the dash, the top 3 I can't get them to work, the bottom two works. R the top 3on a different fuse? Or can I cut the wires make...
I have 1977 f100 302 rpm intake eldelbrock 1405 carb. camb. no vacuum leak want idle uner 1500 rpm when i drop in drive rpm drops to 5 600 rpms can not fine the problem need help
I put a 89 mustang GT motor with a old dual plane cast iron intake off a 65-66 mustang hi po motor with a holly 600 CFM 4 brl carb and still have shorty headers and dual ex. with flowmasters on it w...
My 1978 Ford f100 was originally a 3 on the tree, swapped over to being on the floor. im just wondering if there are any easy options to swapping it to a 5 speed?
Search Ford F-100 Questions
Ford F-100 Experts
Related Models For Sale