Ford Explorer keyless entry

rase back door -window up.you should see a small white sticker with numbers on it.this is yout keyless entry numbers.

If it came with the owners manual, there should be a same card with the code on it. if not, read the section in the manual about the key pad, and it will tell u how to reset the code

sorry,no it wont,is preset at factory.the sticker could also be in door jam-small stickerwith black numbers,

Any Ford dealer will be able to tell you what the code is, however there will be a charge for the service.

its written on the keyless entry module. I think on that one its behind the lf trim panel.

After some research the code should be on the keyless entry module. And that module should be located in the compartment houses the jack on the drivers side by the lift gate. it'll be a five digit code in fairly bold print

the module for the car alarm is located in front of where the jack is stored. printed on the module is your code

Us your cell phone camera to take a picture of the manufacter sticker. Youl save a lot of time by not taking thr panel off. 5 digit number bold numbers

After entering factory code. Locks still won't work