97 Ranger engine light came on. I retreived the error code and it is the EVAP system. Error code is 443 which indicated the Canister Purge Valve (Soleniod). So I replaced it but the same error code keeps returning. Any Ideas, I am confused.... Thanks

97 Ranger engine light came on. I retreived the error code and it is the EVAP system. Error code is 443 which indicated the Canister Purge Valve (Soleniod). So I replaced it but the same error code keeps returning. Any Ideas, I am confused.... Thanks 1 Answer

I have a 07 ranger, 6 cyl. The error code says I have a leak in the vapor system. 7 Answers

Did a smoke test and saw no leak. What's next??? Where can I get a good description of how vapor system works?? When should the canister near the rear axel open and close?

My 1996 Ranger starts but I turn the key to the off position the engine keeps running. There is no resistance at all. I replaced the lock cylinder. No change. What else could it be? 3 Answers

My 1996 Ranger starts but I turn the key to the off position the engine keeps running. There is no resistance at all when I turn the key counter clockwise . I replaced the lock cylinder. No change. Wh...

I have a 1991 Ford ranger and I have burnt up two fuel pumps due to it running all the time when truck is on. Any Ideas on whats wrong? 1 Answer

My ranger is burning up fuel pumps, I am on my second fuel pump. The fuel pump runs even when the truck is shut off. I have to remove a battery terminal to keep from eating fuel pump up. Help!

I have a 1998 ford ranger automatic 3.0 v6 it looses power (sometimes) in the lower gears..Was told there is a misfire on #2 an#5or4. I replaced the ignition coil an got new sparkplugs an coil wires. 2 Answers

I have a 1998 ford ranger automatic 3.0 v6 it looses power (sometimes) in the lower gears..Was told there is a misfire on #2 an#5or4. I replaced the ignition coil an got new sparkplugs an coil wire...