94 3000gt I replace crank sensor,ecu,coils,and fuel pump My problems is that one of the coils does fire but the other two coils pack doesn't fire eventhough the wires do run with eletric help pls

94 3000gt I replace crank sensor,ecu,coils,and fuel pump My problems is that one of the coils does fire but the other two coils pack doesn't fire eventhough the wires do run with eletric help pls 3 answers

95 3000gt no fire on 2 coils 1 answer

My 95 Mitsubishi 3000gt isnt getting fire on two out of three coils. I have been told that it could be my ignition coil, power transitor unit, or some type of electric fire unit. Can anyone help...

having problems here I have a 95 3000gt car was working fine on Friday come sunday it wont start. when I turn the ignition on I hear no relays turning on and off and fuel pump dose not prime. all the lights come on and off on the dash. and the fuel pump dose come on when cranking. I do have spark and fuel pressure. would this be a bad main relay or an ecu? I need help 26 answers

having problems here I have a 95 3000gt car was working fine on Friday come sunday it wont start. when I turn the ignition on I hear no relays turning on and off and fuel pump dose not prime. all the ...

I own a 92 3000gt SL and it likes to only start when it wants to. When it does start it drives completley normal but sometimes it will just sit there and turn over as she usually would. then 30 minutes to and hour and a half or so i try again and she starts up 90% of the time. Very sporatic and i was curious if anyone new what this could be? ignition module, crank angle sensor or cam angle sensor, or ignition coils or plugs and wires are my suspecrts so far? please help thank you 3 answers

Dohc 3.0 92 3000gt SL

I have been having problems with my '93 3000gt SL and keeping it running, sometimes it runs fine then others it idles low then cuts off, and help? 4 answers

Lately, my 3000gt has been having problems staying running all of the time. At first I thought that it was the ignition coils and replaced to set in the middle. After getting that installed it still...