My wife put our 2004 Mitsubishi Endeavor 3.8 awd
l's in a muddy ditch the other day it barried the
passenger side when I got there she said the radio
made a funny noise when I got there I tried to
start it it tried one time and then it just spun lie the
timing belt broke got it home and it wasn't broke
so I took it a part and reset the marks lined it up
and it is just spinning no hit like all pressure
dropped out getting gas no hitting get just
I thought it was 180 out but same thing
On some vehicles there is an inertia switch that is triggered when there is an accident or shapr impact. This inertia switch keeps power from going to the fuel pump to avoid a possible fire during an accident, rollover or other incident. It is possible that if your Endeavor has an inertia switch, it may have been tripped. They are easy to reset, but sometimes hard to find. Please refer to the owner's manual for location of inertia switch if so equipped. I will do some googling in the meantime to see if I can find more information for you.
I am not finding an inertia switch, but possibly check the relay. See the link.....http://www.rockauto.com/en/catalog/mitsubishi,2004,endeav or,3.8l+v6,1421435,electrical- switch+&+relay,fuel+pump+/+circuit+opening+relay,3380
OK I will I have set the timing at least 10 times it's like it don't have any compression
If you had to reset the cam timing due to mud or foreign material on the belt then t is likely that valves are bent as this is an interference engine. Meaning that the valves will collide with the pistons if the cam belt breaks or slips. See the link for more info.....http://www.goss-garage.com/timing-belt-reference/mitsubishi/
Looking for a Used Endeavor in your area?
CarGurus has 697 nationwide Endeavor listings starting at $2,450.
Search Mitsubishi Endeavor Questions
Mitsubishi Endeavor Experts