O2 sensors bank 2 sensor one
I trying to change the o2 sensor for bank to sensor
1 but not sure which one it is pls help a pic word
Bank 2 (sensor 1) will be upstream meaning the sensor closest to the engine on that bank... sensor 2 will always be behind / after the catalytic converter.
I have none after cat I took interior/consol out cant find any wire hook-up [all I have now is 2 one on each manifold ]
Here is where bank 2 sensor 1 is located. Sensor 1 is located upstream top of the exhaust manifold sensor 2 is after the pre-cat the photos not exactly your vehicle but very similar. NO, wires inside the car. The harnesses and connectors are under the hood.
thanks that's what and where I have on a o2 eclipse took motor out of 2000 put in 02 the 2000 had 3 [2 before and 1 after cat] total that's what made me scratch my head thanks again
1 more question oil indicator light is on even with wire unhooked/unhooked ecm plug under console stayed on/only goes out when dash plug unhooked [I tried 3 diff clusters]
wat color is wire at plug behind cluster so I can run new wire
didn't unhook ecm unhooked connector plug beside ecm
Most likely it is your SENDING UNIT. If your light comes on due to low pressure, it is usually way too late. They come on at around 5 psi, and at that low pressure your engine would be knocking. If you can, check the pressure with a manual gauge. If its good, go ahead and change out the sending unit. Regards
replaced unit no difference- 25lbs idle 40 lbs 2000 rpms- like I said with wire UNHOOKED lite is still on -single wire unit so to me that means wire is grounded some where [02 eclipse]
Looking for a Used Eclipse in your area?
CarGurus has 1,148 nationwide Eclipse listings starting at $1,799.
Search Mitsubishi Eclipse Questions
Mitsubishi Eclipse Experts