Replaced my starter. It fired up. After three or four times, it would no longer turnover. Is the problem the starter, ignition, or wiring?
4 Answers
is the starter cranking? if cranking, is fuel in the cylinder drenching sparkplug? remember that the fuel pump is mechanical.
The starter is not cranking. When I first put in the new starter last week, it started right up 3-4x, then it wouldn’t crank. Yesterday, unwired it, change the connector on the ignition wire cuz it didn’t fit tightly on the male connector from the starter solenoid, fired right up. 3-4 cranks it fired up, but now won’t crank again.
Did a voltage meter test. Got 12.4 volts from the battery to the starter solenoid. Got 12.4 volts from ignition to the starter solenoid. The starter is getting power from both ends. I can jump start the starter as well. The only thing it can be is a bad solenoid.
