1997 2500 Chevy pickup
Okay truck has gas and spark will not hit a lick at
Have replaced about everything I can except ecm
including key ignition distributor wires plugs etc.
anyone have any place to start to look?
I'm at a loss with gas and spark it won't start. I have
fuel at rail 63psi spark I'm guessing maybe
computer can stop injectors from getting fuel
maybe security thing possibly? Please help
yes...the battery and cables are often overlooked...they must be able to pull 40 amps ....that is why they are so big and hearty...so connections....they must be cleaned with a wirebrush...even if clean, the battery must have 12 12.5 volts and will put out 40 amps for the starter~ connection from battery to motor block and the one that goes to the fender/chassis...these must be happy with 40 amps~...in summation...get a new battery if yours is older then 6...and new cables...black splits in two one for the engine one for the chassis...be sure these are there and happy~ systems will return to normal once served correct voltage and amperage~ these systems are fussy....even more so with modern airbags, communication systems etc.~
Have it read for codes, even if the check engine light is NOT on the computer will have stored information and codes. Discount auto stores will read codes for no fee. write them down.
Search Chevrolet C/K 2500 Questions
Are you a UK consumer? CarGurus now has a discussion forum in the UK.
Chevrolet C/K 2500 Experts