2000 excort zx2 s\r has com position sensor generic code and excessive cam timing manufacturers code. Is this just a faulty cam position sensor?

2000 excort zx2 s\r has com position sensor generic code and excessive cam timing manufacturers code. Is this just a faulty cam position sensor? 1 Answer

Where is the cam shaft sensor in 2003 ZX2 2 Answers

I had a shop run a diagnostic tool on my car yesterday and found out I have a cam shaft sensor going bad. Where is the cam shaft sensor located in a 2003 Ford ZX2 and what should it look like? To re...

Not sure if anyone can help but here goes , 1998 zx-2 replaced the exhaust it was rotted and had leaks ,a month later code po340 set . replaced the cam sensor and both 02code came backon any ideas 1 Answer

a month after the exhaust was replaced code po340 set , replaced cam sensor and both 02 sensors ,was good for a day ,then code set again .ANy ideas how i can get this code fixed , thanks for any h...

1999 ZX2 with 2.0 liter Zetec engine "Timing Belt and cam shaft marks?" 1 Answer

Timing belt broke in the shop when turning engine with Crank bolt. I know nothing like last minute. Need to know exact alingments for dbl over head cams. Using fire order I can get them close but need...

99 escort died while driving threw cam pos sensor code changed sensor now no start 1 Answer

I was driving down the road. Stopped at 4 way, went when my turn shifted into 2nd, shifted into 3rd, car died. Code reader returned three codes, differential pressure sensor, o2 sensor and camshaf...