firebird338 answered 8 years ago
Maintenance light usually means its time for an oil change or tune up something of that nature. Who ever does the job will reset once maintenance is complete.
You need to turn ignition of,press and hold the select/reset button in the instrument panel,then turn the ignition switch ON.Hold the button until the indicator resets(about 10 seconds).
THE LIGHT COMES ON AND FLASHES.I TRIED PUSHING THE ODOMETER TRIP BUTTON AND HOLDING FOR 30 SECONDS.THIS DID NOT WORK.
2004 Honda Accord LX
-
Maintenance & Repair
I have Honda accord 2008 LX and every time I crank on the car the check engine light flashes. When I put in the code reader it tells me the crankshaft sensor which I already changed and it list a ...
2008 Honda Accord LX
-
Maintenance & Repair
my car jacks some time. Also drags anytime the TCS light comes up, if i off and restarts it' works fine
2003 Honda Accord EX V6
-
Maintenance & Repair
I have a 95 Honda accord LX. I've had my transmission replaced as well as valve gasket covers. My car is doing the same exact thing it did when I originally took it in. I need an answer from someone w...
1995 Honda Accord
-
Maintenance & Repair
After the oil changed for my 2014 Honda Accord, the Maintenance Required Light was no longer on, therefore I cannot read odometer, trip meter and other gauges. What is the procedures to reset it after...
2014 Honda Accord Touring
-
Maintenance & Repair
2004 Honda Accord
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.