i have 1992 gmc sonoma. engine will turn over but wont start. replaced fuel pump,fuel filter,fuel strainer,fuel pump relays. what could causing it not to start.
3 Answers
nogenius answered 5 years ago
First thing to check in this situation will be spark then fuel pressure.if you smell gas then your not getting spark.
James answered 5 years ago
mrs smith, diagnostic tests are necessary before throwing parts in, there are a number possible causes, and as stated no ,spark would be likely
Your Answer:
Related Questions
-
i have 1992 gmc sonoma. engine will turn over but wont start. replaced fuel pump,fuel filter,fuel strainer,fuel pump relays. what could causing it not to start. 3 Answers
1992 GMC Sonoma 2 Dr SLE Extended Cab SB
-
Maintenance & Repair
-
1997 GMC Sonoma 4.3 v6 cranking, firing and has spark, also hear fuel pump, I've replaced the EGR Valve, Distributor Cap and Rotor, but still will not start,what could it be? 1 Answer
1997 GMC Sonoma 4.3 v6 cranking, firing and has spark, also hear fuel pump! I've replaced the EGR Valve, Distributor Cap and Rotor, but still will not start,what could it be?
1997 GMC Sonoma 2 Dr SL Standard Cab SB
-
Maintenance & Repair
-
1997 gmc sonoma just changed fuel pump and fuel pump relay, getting gas but still will not start 1 Answer
I have changed the fuel pump and the fuel pump relay, getting plenty of fuel, but still will not start
1997 GMC Sonoma 2 Dr SLS Sport Extended Cab SB
-
Maintenance & Repair
-
Fuel pump 2 Answers
Truck suddenly died while I was driving tried starting it and the fuel pump wouldn't get power. I've replace the fuel pump, distributer, and fuel injectors what else am I missing. It's a 93 4.3 v6...
1993 GMC Sonoma 2 Dr SLE Extended Cab SB
-
Maintenance & Repair
-
I installed a fuel pump on my 2002 GMC Sonome engine 4 cyl. It started righd not startet up. But, after driven 2 miles, stalled out and died. Since then I could start only after taking out pump out of tank and reinstalled. Oil pressure is more than 40 PSI. I can not find any voltage from terminal.. I put a hotwire (jumper) from 87 terminal to 30 Terminal in fuel pump relay terminal, still no juice. I put a wire from batter to straight to pump . The new pump made noise . Still could not start. In this morning I put a jumper from 87 terminal to pump. I managed the engine running. I could start without jumper about 5 times. While the engine running, I decided to take my truck to road test. Whiel the engine running, I was gathering some tools and equipment for in case of broke down, the engine shut off. Why does my truck do this? I need help, please. 2 Answers
I installed a fuel pump on my 2002 GMC Sonome engine 4 cyl. It started righd not startet up. But, after driven 2 miles, stalled out and died. Since then I could start only after taking out pump out of...
2002 GMC Sonoma SL 2WD
-
Maintenance & Repair

Looking for a Used Sonoma in your area?
CarGurus has 192 nationwide Sonoma listings starting at $2,500.
Shortcuts
- GMC Sonoma Questions
- All Questions
- Ask a Question
- GMC Sonoma Reviews
- GMC Sonoma For Sale
Search GMC Sonoma Questions
GMC Sonoma Experts
-
#1parkleReputation910
-
#2Mike BonnellReputation540
-
#3James MayfieldReputation350
Find great deals from top-rated dealersTM
SearchRelated Models For Sale
Used Cars For Sale
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.