If those are your only choices, AC Delco. I try to stay with Delco parts for my GMs. Definitely better quality and better fit than other parts. But for a Ford Product I'd go with Motorcraft if it's available. Hope that helps! Jim
Avoid anything that says MasterPro. MasterPro is Oreilly's junk line of parts. The best is almost always OEM. Cost a little more, but usually worth it.
Wich is better for lower ball joints
2001 Ford Mustang Coupe RWD
-
Maintenance & Repair
The lower 2speeds on my AC blower fan quit working, the 2other higher speeds work fine and ac blows cold
2003 Ford Mustang Deluxe Convertible RWD
-
Maintenance & Repair
My 1967 mustang ac won't blow any air or work. I turn the nobs and nothing happens. Any help? I replaced all the fuses. The heat vents work. The ac is an aftermarket part and was serviced 5 months a...
1967 Ford Mustang Coupe RWD
-
Maintenance & Repair
Recently the brake lights do not work. Brakes work fine. Have looked under the dash to see if there is a switch around the brake pedal, didn't see one. There are 2 wires on the master cylinder. Do...
1964 Ford Mustang Coupe RWD
-
Maintenance & Repair
The AC fan motor stopped working. All of the fuses are ok. What could be the problem
2004 Ford Mustang Premium Convertible RWD
-
Maintenance & Repair
2001 Ford Mustang
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.