I have to replace the heater sensor located on the firewall that has two hoses attached do I have to drain the coolant first and can I get to the longer hose to release it from the heater core?
Can I cut the hoses and install them to the new part with new clamps? using
the old hoses that are difficult to reach way down in the engine compartment.
Nissan did not know the correct parts needed to fix this problem but U-tube
Ya, but make sure the hoses would be long enough to re-attach to the new part. Just pinch the hoses off so they are not leaking coolant when you do this, you will loose some.
Thank you, one other thingcan i re use the hoses by cutting them and join ing with the new hose and a tube insert into both hoses so i dont lose any length?
If need be sure.
Looking for a Used Titan in your area?
CarGurus has 20,495 nationwide Titan listings starting at $3,695.
Search Nissan Titan Questions
Nissan Titan Experts