Check fluid in transfer case this switch is mounted on the transfer case housing.
Sooooo.... had "service 4wd system" alert and then one day my 2008 jeep gc 5.7 hemi wouldn't start. Took it in and it was a fuse that controls both. NOTE: FUSE WAS NOT FRIED! It just tested as having bad resistance. They replaced the fuse and the error for "service 4wd system" has been gone since and she starts everytime! CHECK RESISTANCE ON THE FUSE!!!!
2009 Jeep Grand Cherokee Limited 4WD
-
Maintenance & Repair
Will not start
2012 Jeep Grand Cherokee Laredo
-
Maintenance & Repair
Hey Guys, would anyone know how to fix "Service 4WD system" the sign constantly coming up and 4WD is not shifting.
2008 Jeep Grand Cherokee Limited 4WD
-
Maintenance & Repair
My Jeep Grand Cherokee Laredo 2009 has power on everything but no lights in the dash and it will not start or turn over no power
2009 Jeep Grand Cherokee Laredo
-
Maintenance & Repair
After first starting the jeep and trying to drive you can hear the actuator inner locking while not in 4 low. After a while Of trying to drive it from the wheels locking it will drive normal and th...
2006 Jeep Grand Cherokee Laredo 4WD
-
Maintenance & Repair
2009 Jeep Grand Cherokee
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.