My a/c stopped working completely. I bought and replaced the resistor.nothing... I straight wired the blower motor and it works. No fuses blown.....help
Did you check the freon level in the system because if it is completely empty the system will shut down.
When I straight wired it. It was blowing out cold air. U still believe it could b freon?
That might sound like a dumb question lol but I dont know
Ok had to ask. There is a High Pressure Switch that screws into the side of the accumulator and it has two wires going to it. Lightly tap on the switch and see if the compressor comes on if it does replace switch.
Tap on it with a hammer or end of a screwdriver.
the compressor is clicking on when I turn the knob. I just had compressor replaced about 2 years ago. my husband is bring home Freon this afternoon and I will tell him all this. My control knob was acting up kind of since I got it 3 years ago. I couldn't turn it all the way up. I would have to turn it back just a hair to the left to get it to come back on for high. Then last week it just stopped all together. so I am in ALABAMA with 100 degree weather sweating like a pig with the windows down. lol. but while im going down the road I can feel cold air coming out of the vents but as soon as I roll them up its an oven in there. so that's why we thought it was the blower not blowing r the resistor. and when I turn the knob the light comes on like it is on but its not
Ok that is a whole lot more information going by what you are saying sounds like the control switch is not working not because there is something wrong with the compressor. If compressor is staying on do not try to add more freon to system.
so the wires behind knob... right?
I just read again in one of your answers that when you turn the knob to A.C the compressor comes on so do you mean that you're blower motor is not working that is the motor that blows air on you when you are in the vehicle.
yes.... it is NOT blowing but when I straight wire it then it works
You have a bad blower motor switch. Does it not work in the heating mode also ?
Sorry that I did not get the understanding the first time.
no it doesn't blow at al
Yeah you need a blower motor switch.
where will that be?
The knob that turns your blower motor on to the different speeds.
It's in the dash
lol that's what I thought but I just call it the a/c controls. yes im a blonde. you are EXACALLY right. He took it out and its not touching right inside. if we squeeze it together it touches on the inside and works good. we have got to get a new BLOWER MOTOR SWITCH. lol Thank you sooooo much. I appreciate u.
took off the blower motor switch and took it apart. it had some kind of corrosion between the knob and the board. we scrapped it off and it works like brand new. so that saved us $100 or so on a new part. But now there is a whistling noises coming out of the vent. do u know have idea what that might be? Its blowing fine now tho on ALL settings. just got the noise now
Your vehicle has a Cabin Air Filter try replacing that. Do not no how to replace on your vehicle but you can Google that question and it may take you to a site and show you how to replace it.
Looking for a Used Nitro in your area?
CarGurus has 2,323 nationwide Nitro listings starting at $2,495.
Search Dodge Nitro Questions
Are you a UK consumer? CarGurus now has a discussion forum in the UK.
Dodge Nitro Experts
Wutcha Gonnado Boutit