What is the problem when your clutch pedal goes to the floor before it goes into gear and the fluid is good
It probably means the slave cylinder needs to be rebuilt but I suppose it could be the master cylinder too.
2 people found this helpful.
Either that or the mechanical linkage is broken. You need somebody to get under truck and you push clutch (or lay on the ground yourself) and when the clutch is pushed if you can see the 'arm' move in bell-housing the right back to Full_of_Regrets answer. But if you see no movement, follow the linkage all the way to the pedal
2 people found this helpful.
have a look, click on it ... but this shows a cable system but same thing at bell housing
2 people found this helpful.
This is what I have been looking for
2 people found this helpful.
