check engine light won't reset
How can I reset my check engine light i tried to reset it with a code scanner but no luck I than unhooked the battery over night and still no luck the code I was getting was p0328 I replaced the knock sensor before I tried to reset it
If you're still getting the same trouble code after clearing the computer (PCM) with a scan tool the problem is with the knock sensor circuit, not the knock sensor itself. The wiring may be shorted or the plug for the knock sensor may be damaged. Is the engine knocking or pinging? Especially on acceleration. HTH. -Jim
Always found that a new Subie (or generic Nissan) sensor cures the code; check wiring as suggested above. Even if inoperative the Subie 2.5i will not tend to ping, so don't sweat it.
thanks we had a lot of snow here yesterday and when it clears up I will check out the wiring . After replacing the old sensor with a new one i checked out the sensor I took out and using my multimeter it looked good . so are you refering the wiring on the sensor or the wiring that is coming in from the engine harness ????
The latter. We had our first whiting (not including the election) of 1/4" last night.
The wiring coming in from the engine harness. HTH. -Jim
ok thanks i will check it out
and No the engine doesn't have a ping tp o it
Ok, sounds good. Please keep us posted. - Jim
Looking for a Used Outback in your area?
CarGurus has 42,349 nationwide Outback listings starting at $1,100.
Search Subaru Outback Questions
Subaru Outback Experts
Related Models For Sale
Used Cars For Sale