Jeep JKU 2015 Crank but no start after running fine
About a month ago I went hiking, upon return of my 7 hour hike my 2015 JKU
would crank but no start. It almost caught once then stalled out and died.
Following attempt would just produce crank and no start. Nothing on the dash
indicating an error.
Tried giving it a jump, was not the issue. Finally got it towed two hours back to
my nearest garage.
It's the weekend so garage is closed, they finally take a look on Monday they
say car has no issues, starts right up. No codes, nothing. They don't charge
anything.
Car runs with no issues from then on, I imagine it's a fluke.
Fast forwards to right now, I drive 5 hours back from Vermont to NY. Car runs
smoothly and perfectly.
I double park to load my things into my place run in and out of my apartment.
Go back out to the car to start it up. Just like before, cranks catches weakly
then sputters out. After that car just cranks and no start. Since last time
bought a Code Reader - no codes, nothing. Had to push it down the street and
parallel park with no power on a slight slope....
My theories:
- Fuel system, have dealership check fuel pump... but why would it run
smoothly for hours on end and then this...
- Bad computer, O2 sensors perhaps getting wrong reading, kills the engine
and then after a few days resets itself and it runs again.
- O2 sensors
- Blown fuses
- ... but why no codes?
Last time this happened dealership refused to take it because it was running
again by the time I called them. What should I do?
just passed 40,000 miles on this trip.
Thanks in advance for any advice.
