98 tahoe 5.7 liter was running fine till I changed intake gasket now it was to fire only when the keys springs back

Asked by Oct 22, 2016 at 01:39 PM

Question type: Maintenance & Repair

1 Answer


Timing is way off . You are getting post ignition fire. Make sure your ditributir is at top dead center on compression stroke . Firing order is 18436572 clockwise . Rotor button should be directly pointing at the number 1 cyl (RT front as you are looking at it ) on compression stroke . Good luck

Your Answer

Add photo

Related Questions

  • about the tahoe 1 answer

    iv got a chevy tahoe 1998 i took mudding and it quit on me got it home and tryed start it started about 5 mins and cut off the next day i got it to start again and drove it about 5 miles it quit on...

    1998 Chevrolet Tahoe 4 Dr LS 4WD SUV


    Maintenance & Repair

  • No fire to the plugs 32 answers

    I have an 03 Chevy tahoe 5.3 lt. Motor I changed the fuel pressure regulator the crankshaft position sensor , the fuel filter and all the spark plugs and the truck won't stay start .it will start ...

    2003 Chevrolet Tahoe Base


    Maintenance & Repair

  • running bad and just changed the intake gasket 3 answers

    ok i have a 2000 pontiac grand am i changed the intake gasket and the put it back together and now it does not run so good i got new plugs and wires did not help i cheacked the conpresson and the top...

    2000 Pontiac Grand Am GT


    Maintenance & Repair

  • Help with 98 Chevy 5.7 misfire not running right 2 answers

    Hello. I have a 98 chevy 1500 5.7. The truck doesnt run right at all. Msifres bad under acceleration. Idle ok when misses when reving and accelerating. I did a full tune up including plugs, wires, cap...

    1998 Chevrolet C/K 1500 Silverado Extended Cab LB


    Maintenance & Repair


Search Maintenance & Repair Questions

Maintenance & Repair Experts

#1 Tom Demyan
Tom Demyan
Reputation 150,720
#2 FordNut
Reputation 103,420
#3 dandyoun
Reputation 84,400
View All