1972 Cutlass supreme with a 350 CID eng.
Pulled #1 plug and held the wire against a good ground and nothing.
Pulled the coil wire and did the same, no spark.
got a different wire and tried, still no spark.
Figured the coil was bad so I replaced it and STILL no spark.
Hot wired the coil (thus by passing the ignis switch) and STILL no spark.
Checked the compression and all cyl are 110psi except 2 cyl are at 85 and 90 psi. It still should have enough compression to start, but still no spark.
Ignition control module
Search Oldsmobile Cutlass Supreme Questions
Oldsmobile Cutlass Supreme Experts