In an attempt to replace my left front turn signal bulb I ran into a problem. I
cannot get the harness out. This is the only bulb harness that won't come out
for all the bulbs in the front. (of course). Any ideas how I can get this out
without damage so I can replace the harness and bulb?
Elbow grease my man... sorry! Put on a set of gloves and wiggle that harness until it breaks free- it likely is coated in grime and those plastic junctions like to freeze in the presence of dirt. sometimes I use simple green and rub it on the connector with a shop towel and that usually solves it.
Search Chevrolet Colorado Questions
Chevrolet Colorado Experts