where is the computer module that the keyless door lock code would be taped to it? Thanks.
Owner's guide says it would be taped to the computer module. I can't find it anywhere and am just curious what the code is. Just in case we needed it. The original owner is pretty old now and suffers from some memory loss and couldn't remember. Thanks.
go to a Merc dealer, prove you own the car, and they will run the VIN and get you the code.
Yes, these lock modules typically have the keycodes long gone after almost 10 years. :)
i just found the lock module on an 01 mercury. it was on the drivers door behind the door panel. the sticker was very readable.
Just pulled my door panel on driver side, black box with codes on it, just under speaker. Easy to read, out of the weather. 2001 mercury GM
It is inside the driver door skin. A 5 digit # on module
or look in the trunk on the passanger side hinge its a sticker plain as day
Pull 4 screws ( 1 visible on left about center, 2 behind rubber inserts on upper door pull, 1 under the switch panel after you unsnap it and lift it out) and then pull the whole panel straight up about 1 inch and then out. The code is on the module in the lower right area, and the sticker is on the lower right area of the module. The code is just above the bar codes.
It is on the hinge! Thank you Fred! You saved me time, Bill
Looking for a Used Grand Marquis in your area?
CarGurus has 2,146 nationwide Grand Marquis listings starting at $1,985.
Search Mercury Grand Marquis Questions
Are you a UK consumer? CarGurus now has a discussion forum in the UK.
Mercury Grand Marquis Experts