I just tried to put some additive in my 2001 E350 V10 and I am not sure if all the additive went into the nozzle hole. If some went into the slots around the nozzle hole, does it still go into the tank or somewhere else? I saw no dripping. Anything to be worried about?

40

Asked by Dec 08, 2015 at 03:26 PM about the 2001 Ford E-350

Question type: Maintenance & Repair

I did not see any liquid dripping on the ground just wondering if all the additive
made it into the tank.  The neck of the additive got stuck about where the
opening was so it was hard to know where all the additive went.  Thanks.

9 Answers

91,825

No worries.

2 of 2 people found this helpful.

No worries. It probably did go in to tank. But if not, and no drips, it went in to evap and will just be consumed by intake. But just curious, why do you need an additive?

1 of 1 people found this helpful.
Best Answer Mark helpful
40

Thanks FordNut. I put in a fuel stabilizer since it is a seldom driven RV and has a 55 gallon tank and the gas is getting old. There is a generator and I worry about varnishing when the gas gets old. I ran the generator for about 10 to 15 minutes after adding it so hopefully it got some to it. Thanks again.

1 of 1 people found this helpful.
40

Thanks too FoR.

2 of 2 people found this helpful.
91,825

I would try and use up all the gas at least once a year to avoid major head aches. Use Sta-Bil while you are at it.

1 of 1 people found this helpful.

Makes perfect sense. It's just that some folks feel the need to waste money on 'octane boosters' and that crap. But Like I say, in your case make complete sense. Thanks for responding

2 of 2 people found this helpful.

PS... FoR is right. Sta-Bil is the best product for that

1 of 1 people found this helpful.
40

Thanks. I usually use Sta-Bil but used Sea Foam this year because the generator was not starting up as well as before. We always use at least one tank per year but not sure if we will be taking it our for pleasure any time soon. Drove it about an hour and a half about 3 weeks ago just to run it...

1 of 1 people found this helpful.

Right thing to do. Otherwise condensation can/will form in crankcase, it needs to be run up to full normal operation temperature for at least 20-30 minutes on occasion. Allow the PCV to work. Yep, Sea Foam is just as good. Matter of fact the same recipe.

1 of 1 people found this helpful.

Your Answer

E-350

Looking for a Used E-350 in your area?

CarGurus has 231 nationwide E-350 listings starting at $5,000.

ZIP:

Ford E-350 Experts

  • #1
    Tracy Hooks
    Reputation
    400
  • #2
    tennisshoes
    Reputation
    280
  • #3
    Opal Allen
    Reputation
    210
View All

Related Models For Sale

Used Mercedes-Benz E-Class
605 Great Deals out of 22,149 listings starting at $1,999
Used Ford F-350 Super Duty
377 Great Deals out of 26,050 listings starting at $3,900
Used Ford E-Series Cargo
88 Great Deals out of 3,356 listings starting at $2,200
Used Ford E-Series Wagon
33 Great Deals out of 1,160 listings starting at $2,350
Used Chevrolet Express Cargo
60 Great Deals out of 10,363 listings starting at $2,500
Used Ford F-150
3,268 Great Deals out of 224,291 listings starting at $1,250
Used Ford F-250 Super Duty
470 Great Deals out of 46,746 listings starting at $595
Used Ford E-150
124 listings starting at $3,000
Used Chevrolet Express
76 Great Deals out of 5,003 listings starting at $3,500
Used Ford Transit Cargo
141 Great Deals out of 17,038 listings starting at $9,995
Used Ford F-450 Super Duty
53 Great Deals out of 2,467 listings starting at $4,995
Used Dodge Ram 3500
85 Great Deals out of 2,319 listings starting at $4,900

Used Cars For Sale

1997 Ford E-350 For Sale
21 listings starting at $6,500
1996 Ford E-350 For Sale
13 listings starting at $5,000

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use.