Pilot 2004 engine check lot and vtm light on dash error code p1491 reset still comes back car runs fine?
Normal lift sensor voltage on a closed EGR valve is 1.1 or 1.2 volts. Watch the voltage on the scan tool or back probe the White/Black (WHT/BLK) wire. Remove the Pink (PNK) wire out of the connector at the EGR valve and apply battery voltage to that terminal to operate the EGR valve manually, the EGR valve should open and the lift sensor voltage should increase from 1.1 volts to around 4.0 volts. Always verify that the voltage does not drop out when the valve is operated, or the code will also set. The EGR valve is a common failure. Also if the EGR passages are restricted, it can set this code.
Will try this. Thank you
Replaced Egr valve all is good .couldnt get pins out of plug to check. Thanks for the help
Looking for a Used Pilot in your area?
CarGurus has 40,687 nationwide Pilot listings starting at $998.
Search Honda Pilot Questions
Honda Pilot Experts
#2Patrick Jay RReputation530
Related Models For Sale
Used Cars For Sale